8 Steps on How to Apply Venetian Plaster Wall Finish

Marmorino and Venetian plasters have been trendy since the middle ages because of their stunning appearances and surfaces. They are sometimes generically described as marble or polished plasters, which depend on the finishes that may be achieved. They can be shiny, smooth, or marble textured to look like stone.

So if you’re thrilled about applying Venetian plaster to a specific place in your house, we’ll assist you through the process to achieve a successful finish.

Steps to Take When Applying Venetian Plaster Finish at Home

The antique surface finish of Venetian plaster offers a stylish appearance of natural stone and polished marble. Generally, Venetian plaster is applied by qualified artisans to attain the appropriate effect and finish. Some first-timers would even take a Venetian plaster course to ensure they properly do the job. Interested in formally learning Venetian plaster application? You may browse the web to go now to facilities that offer courses for the mentioned profession.

However, new materials today can help DIYers attain comparable results in easy methods without the expert skills needed. So listed below are eight steps to apply Venetian plaster surface on your home.

1. Choose the type of Venetian plaster you want

The kind of Venetian plaster you pick depends on your skills and budget. Venetian plasters come in three material variants, each with distinguishing characteristics, looks, and price ranges. You can go with acrylic, natural lime-based, or gypsum-based plasters. To know what these look like, you might search the internet to see what would fit your taste.

2. Prepare the walls

It’s best to do a plastering job with smooth walls. Make sure all the holes in the wall are filled and the rough surfaces are sanded, so they do not show in the finished work.

3. Lay down tarps and prepare the tools

Laying down tarps is essential to protect the work area’s floorings, as individuals do when painting. Make sure your Venetian plaster trowels, blades, spatulas, cloths, and sponges are ready to ensure a smooth process and prevent intermittent productivity from finding the tools necessary for the job. Should you need tools for your DIY plaster project or business, you may browse the web for a trusted Marmorino tools shop to buy yours.

4. Prime the wall

After sanding and smoothing the wall, apply primer. This will help bind the plaster you’ll use later, acting like an adhesive or glue. Ensure it’s fully dry before you continue to the next step.

5. Apply the first coat

Use a trowel to apply the plaster’s base coat. Spread the plaster in the thinnest possible way while using small or random strokes and patterns. Avoid spreading it in the same direction. Hold the trowel at an angle of 15 to 30 degrees and frequently wipe it with a dry cloth to keep the plaster dust from affecting your pattern.

6. Apply the second coat

The second coat is meant to smoothen the ridges from the first coat and is often lighter. Put plaster on the trowel and smooth out the previous strokes on the wall. Leave some areas uncovered, so the first coat shows through small patches. If you’re not happy with the result of the second coat, you can apply a third coat if you want.

7. Burnish the finish

Using a clean trowel before the second coat completely dries, burnish the entire wall and slide it across the plaster. Hold the trowel at a 30-degree angle and use moderate pressure to give it a shiny look. Burnishing it more can make your plaster look shinier. Wait for 48 hours before proceeding to the next step.

8. Wax the plaster

Applying a topcoat of protective wax to the plaster can lighten up your wall, soften it, and protect it from moisture. Apply the material to the wall using a sponge in circular motions. You can apply two to three thin coats to wrap up.

Written by